Skip to Content

Crafting Magic: How to Make Clay Mushrooms

In today's step by step guide, we are diving into the whimsical world of how to make clay mushrooms with an extra sprinkle of creativity on how to decorate with these precious little fungi.

This delightful project, perfect for beginners and kids alike, will have you sculpting your own charming fungi out of air-dry clay. Let's turn imagination into reality – let the clay crafting adventure begin!

How to make a clay mushroom

Mushroom decor has made a comeback from the 70s, and this time, it is even more fun and cuter than ever. You can find mushroom decor in stores, like throw pillows, lamps, and wall art. It is everywhere. In fact, we have a mushroom printable in our Etsy shop.

But nothing says adorable and charming like a homemade clay mushroom and the decorating ideas are many, so let's dive into how to make a clay mushroom and get our hands dirty kind of like real mushrooms. LOL!

This post contains affiliate links, meaning I receive a commission if you purchase using the links below at no extra cost to you. All opinions are all my own.

How To Make Clay Mushrooms

To begin making these cute little fungi decorations, you will need some supplies and a flat workspace. Because this project takes up little room, you can even grab a large cutting board and make them while sitting on the floor while watching a movie – that is what I did.

What Supplies Do I Need to Make DIY Clay Mushrooms?

You only need a few basic supplies to make your clay mushrooms.

Is it Difficult to Make Clay Mushrooms?

Good news! It is not difficult at all to make air dry clay mushrooms! This is an easy craft for beginners and kids and it doesn't take a long time. Clay projects are a great way to do a family project. I'm going to give you a step-by-step guide.

We're going to start by making our mushroom shapes.

Step 1 – Start with the Cap

Start by taking a small piece of air-dry clay and rolling it between your hands to warm it and shape it into a ball.

First step when making a clay mushroom by rolling the air dry clay in ball

On a flat surface, press your thumb into the middle of the ball of clay to make an indentation.

DiY clay mushroom making the cap

Continue pressing the clay out to the sides and shaping the sides down slightly.

How to make the cap of a clay mushroom

You can see the start of the top of the mushroom cap shape.

Clay mushroom DIY

Smooth out the mushroom cap by gently rubbing over any cracks or pieces you want to smooth. Remember, mushrooms are not perfect in nature, your mushroom tops do not have to be perfect either.

Making the cap of a clay mushroom

Step 2 – Make the Stem

Let's start on the mushroom stalks or stem by warming a clay section in your hands, just like you did with the cap, and then rolling it into a ball.

Shaping the stem of a clay mushroom

Put the clay ball on your work surface and start rolling it back and forth under your hand, and it will start taking on a cylindrical shape. Once you have a cylindrical shape, use two fingers more on one side because we want one side to be skinnier.

That will be the top of the stem.

Shaping the stem of a clay mushroom

Continue this process until you have the stem length you want.

Place the “stem” with the large side down and apply gentle pressure to flatten the bottom.

Flattening the stem of a clay mushroom

Once the bottom is flat, lay it on its side again and continue to roll it until it's smooth and the length you want.

Clay stem of a mushroom

Step 3 – Make Holes in the Cap and Stem of the Mushroom

Now if you want to make ornaments take a yarn needle and make a hole in the cap of the mushroom, starting from the top and go straight through.

Note – if you don't plan on hanging your mushrooms, you can use the hot glue gun to attach the stem to the cap and skip making the holes and threading the twine.

Making a whole in the cap of a clay mushroom using a yarn needle

Ensure the hole is wide enough for thread to pass through it. You can smooth the bottom of the hole where the excess clay builds up.

How to make a clay fungi

Next, you'll use the yarn need to make a hole through the thin end of the stem, wide enough for thread to go through it.

DIY clay fungi mushroom

Step 4 – Let the Mushroom Dry

How to make clay mushrooms

Here's an easy step – let the mushroom forms dry overnight.

Step 5 – Thread the Twine Through the Mushroom Stem and Cap

Now you can paint the mushrooms if you choose. I'm going to leave mine a natural color and go straight into threading the pieces. You can use twine or any kind of string. Cut a long length. Thread the twine or string through the yarn needle.

Cut twine to put through the mushroom cap

Thread the twine through the top of the cap first.

Threading twine through the cap of a clay mushroom

Next, you'll go under the cap and thread the twine through the stem.

Threading twine through stem of clay mushroom to make a Christmas ornament

Go under the cap again and pull the twine through the top.

DIY clay mushroom ornament

Pull the thread and it will pull the stem underneath.

Pulling twine to connect the cap and stem of a clay mushroom

Step 5 – Tie Up the Twine Ends

For the final step, tie the ends of the twine into a knot.

Cut off the excess twine about 1/2 inch from the knot on each side, then fray the ends to look like a tassel.

That's it! You have your very own clay mushroom ornaments. I love this mushroom project. It's such an easy and fun project!

Making a clay mushroom decorations

Decorate with your Mushroom

Now it's time to decorate with your DIY mushrooms. There are so many ways you can decorate with your clay creations. I'll be hanging them from my Christmas tree as ornaments.

Decorate your Christmas Tree with Clay Mushrooms

DIY clay mushroom Christmas ornaments

They're also the perfect addition to a fairy garden, in a terrarium, in the kitchen, hanging on furniture hardware, just about anywhere.

DIY Clay Mushroom Garland

You can also make a garland hanging on the top of the bookcase like this. Roll out the air dry clay and use a cookie cutter or draw and cut out mushrooms. Then, string wooden beads and the mushrooms.

How to make a clay mushroom garland

These adorable mushrooms will add a spot of whimsy to your home and make you smile all year long.

Clay Mushroom Decoration on Bookcases

Decorating a bookcase with clay red and white mushrooms

Conclusion

I had a great time making these clay mushrooms and I hope you do too. Now that you know how easy it is to make clay mushrooms, you can make it an activity the whole family can enjoy.

You can use acrylic paints and small brushes to paint the mushrooms after they dry if you choose. I like to use red and white paint to look like a traditional fly agaric mushroom, which is a red capped mushroom with tiny white dots.

How to paint a clay mushroom red to make it look like Fly agaric mushrooms

After I painted the cap red on the top and white on the inside, I used a toothpick with the end cut off and dipped it in white paint to make dots.

DIY clay mushroom with red and white dots

This little clay mushroom turned out so adorable!

Fly agaric clay mushroom DIY

But you can also be abstract, use your imagination. Be creative with how you decorate with your mushrooms. I'd love to hear your ideas in the comments! If you're looking for more DIY inspiration, check out these posts:

Happy Decorating!

how to make clay mushrooms

How to Make Clay Mushrooms

Active Time: 30 minutes
Additional Time: 1 day
Total Time: 1 day 30 minutes
Difficulty: Easy

This delightful project, perfect for beginners and kids alike, will have you sculpting your own charming fungi out of air-dry clay. Let's turn imagination into reality - let the clay crafting adventure begin!

Instructions

  1. Start by taking a small piece of air-dry clay and rolling it between your hands to warm it and shape it into a ball. On a flat surface, press your thumb into the middle of the ball of clay to make an indentation. Continue pressing the clay out to the sides and shaping the sides down slightly. Smooth out the mushroom cap by gently rubbing over any cracks or pieces you want to smooth.
  2. Start on the mushroom stalks or stem by warming a clay section in your hands, just like you did with the cap, and then rolling it into a ball. Put the clay ball on your work surface and start rolling it back and forth under your hand, and it will start taking on a cylindrical shape. Once you have a cylindrical shape, use two fingers more on one side because we want one side to be skinnier. That will be the top of the stem. Continue this process until you have the stem length you want. Place the "stem" with the large side down and apply gentle pressure to flatten the bottom. Once the bottom is flat, lay it on its side again and continue to roll it until it's smooth and the length you want.
  3. Take a yarn needle and make a hole in the cap of the mushroom, starting from the top and go straight through. Use the yarn need to make a hole through the thin end of the stem, wide enough for thread to go through it.
  4. Let the mushroom forms dry overnight.
  5. Now you can paint the mushrooms if you choose. I'm going to leave mine a natural color and go straight into threading the pieces. You can use twine or any kind of string. Cut a long length. Thread the twine or string through the yarn needle. Thread the twine through the stem first. Go under the cap and pull it through that hole. Remove the needle from the twine. Put the needle through the other end of the twine. Go under the cap again and pull the twine through the top. Pull the thread and it will pull the stem underneath.
  6. Tie the ends of the twine into a knot. Cut off the excess twine about 1/2 inch from the knot on each side and then fray the ends so they look like a tassel.

Notes

If you don't plan on hanging your mushrooms, you can use the hot glue gun to attach the stem to the cap and skip making the holes and threading the twine.

Did you make this project?

Please leave a comment on the blog or share a photo on Pinterest

Skip to Instructions